How do I retrieve my Honda car radio code?
of reading - words
The radio code is a security system that protects your Honda radio against theft, but if you remove the radio from the vehicle or disconnect the battery, you will need to enter your Honda radio code for the radio unit to work again. In most cases, the radio code is printed on a small card and included in your owner's manual. If you lose your radio card or buy a used radio, you can easily retrieve your Honda radio code at any time.
Honda radio asks for unlock code
Many Honda models have a radio code on a small white sticker inside the glove box. This code will be labeled "Anti-Theft Radio Code". Enter this code using the Honda radio preset radio buttons. You will hear a beep and the radio will resume normal operation.
Don't worry if you don't have a Honda radio code in your glove box. You can always restore it. But first you need the serial number of your Honda radio. So here's how:
-
How to disassemble a Honda radio?
So we want to make sure the car engine is off first. You should now have the radio extraction key for the first step. With these sharp knives, you will remove the cover of your car radio. Now just pull the lid off with these extraction keys.
Why use the extraction key to remove the Honda radio?
I always recommend using the proper tool to remove the Honda radio from your car. The main purpose of this post is that I see a lot of people who don't have an extraction tool
radio at home. Although these tools are relatively cheap.
"Honda radio socket key"
When you remove the Honda radio from the car without using the extraction key, do not rush to remove it. You could break the exterior plastic or even damage the radio wiring.
You must use the two extraction keys and push them on the sides of the Honda radio to extract it. It's a simple process and you can easily remove the case. Be careful not to hurt yourself.
"Remove the Honda car radio"
Now that your Honda radio's casing has been removed, you can see the plastic inside. You can easily remove the inner plastic by hand. Now you just need to push up and down and pull out the inner plastic. Usually it comes out easily and you have to be careful and slow to avoid breaking the frame.
You can still use the two extraction keys and place them in the corners of the radio frame, then pull the frame by applying pressure to the extraction keys. If it still doesn't work, you'll need to remove the metal holding it in place.
To remove the metal clips that hold the car stereo so it doesn't get stuck in one place, you'll need two pliers. Grasp the corners of the frame with these pliers and slowly pull them out.
Pull it out very carefully, firmly holding both tweezers in both hands. You must use the two tweezers to remove it. When pulling, make sure it is straight, otherwise it may break or get stuck. I always recommend that you follow the instructions in the instruction manual that came with your Honda radio.
If you want to handle this task yourself, you can find thousands of guides on how to remove Honda radio using Youtube or Google.
2- Where can I find the serial number of my Honda radio?
Then you will need the Honda serial number to retrieve the radio code.
You will find this serial number on the anti-theft identity card placed in the glove box during purchase. You can also find the radio serial number on the display of the Honda radio itself.
Honda car radio serial number
There are different types of Honda serial numbers, sometimes called security codes. They are located on the top or side of the radio case or printed on a label. As the example shows, this is the information you need to generate the correct decode for you. An example of this is "JBT24018359A", see the image below for reference.
honda car stereo serial number
The serial number is sometimes engraved on the metal casing, as shown in the serial number of this Honda radio. Make sure all numbers and letters are correct in order to calculate the correct code for your Honda radio.
honda radio serial number
Navigation System Accord 2003-2007:
Turn the ignition switch to ACC (I).
Switch on the audio unit and ensure that COdE appears in the upper display. If you do not see this message, remove the spare fuse for 1 minute, then return to step 1.
Switch off the audio unit.
Press and hold the SEEK/SKIP button and the upper half of the CH/DISC bar, then press and release the PWR/VOL button. This display toggles between two screens.
The first screen displays a U and the first four digits of the serial number (for example, U2200).
The second screen displays an L and the last four digits of the serial number (for example, L0055).
Ignore the U and L and write down the eight digits.
honda radio screen serial number
Available for all models
Turn the ignition switch to ON.
Turn on the device and verify that the display shows COdE. If you do not see this message, remove the spare fuse for 1 minute, then return to step 1.
Switch off the device
Press and hold radio preset buttons 1 and 6, then turn on the device.
The display toggles between two screens: U and the first 4 digits of the serial number (eg U2200).
and L with the last 4 digits of the serial number (eg L0055).
U and L are ignored and the 8 digits are saved.
Please write down this serial number as you will need it for the form above.
"Serial number on Honda car radio display"
Once you have the required information, retrieve your Honda car radio unlock code by ordering your Honda car radio unlock code via the form above.
3- How to enter the unlock code on the Honda radio?
Almost all Honda radio codes consist of 4 to 5 digits. When your radio displays CODE, you must enter this 4-5 digit security code. This is done by pressing the preset radio button corresponding to the code number.
the first method:
Turn the ignition key to the ACC or ON position.
Make sure the Honda radio is on ("CODE" should be displayed) NOTE: If you do not see "CODE" displayed on the radio, the radio may not require a security code. If you see the radio frequency displayed and the radio does not work, it may need repair or replacement.
Using the radio preset buttons 1-4, enter the security code as follows: (in this example the security code is 5364).
to have. Press the number 1 preset button repeatedly until the first digit of the code (5) is displayed (if you have skipped a desired number, press and hold the button. The digit sequence restarts after 9).
- Repeat the previous step with preset number 2 until you see the second number (3) of the code.
Repeat these instructions for the third (6) and fourth (4) bits of the alignment code.
D. Check the number displayed on the radio (5364) with the security code you obtained.
The second method:
Turn the ignition key to the ACC or ON position.
Make sure the radio is on.
Repeatedly press the "1" key until the first digit of the correct code is displayed.
Repeatedly press the "2" button until the correct second digit code is displayed.
Repeatedly press the “3” key until the correct third digit code is displayed.
Repeatedly press the "4" key until the correct four-digit code is displayed.
Note: Take your time. You have 3 chances to enter the code correctly. After the third false attempt, the radio will display "OFF" and will not accept the code until the reset procedure is complete.
Therefore, the exact process for entering a Honda radio code varies from case to case. But in most cases, you'll use the volume or tuner buttons to select a number, then click that button or press another button to move forward. Before entering a Honda radio code, it is important to understand what you are doing.
Now use code-radio-instant.com to find Honda car radio codes:
We provide unlock codes for 56 Honda radios. Since the launch of the service, more than 19,656 customers have received a Honda car stereo unlock code.
Whether it's an old Honda radio or one of the latest versions, with our premium service you will find a solution to obtain your Honda radio code quickly and officially. You don't need to send us your radio, just give us your radio's serial number and we'll quickly deliver your Honda radio unlock code to you.
Many Honda models have a radio code on a small white sticker inside the glove box. This code will be labeled "Anti-Theft Radio Code". Enter this code using the Honda radio preset radio buttons. You will hear a beep and the radio will resume normal operation.
Don't worry if you don't have a Honda radio code in your glove box. You can always restore it. But first you need the serial number of your Honda radio. So here's how:
How to unlock your Honda radio online for free?
Fill out the form with your Honda radio serial number and the email address where you would like to receive the vehicle radio unlock code.
Once your Honda unlock code is successfully generated, you will receive an email notification with the unlock code and step-by-step instructions on how to unlock your Honda radio. Delivery times may vary depending on the radio model. But most cases are instantaneous.
Once you receive the email with your Honda radio unlock code, simply follow the step-by-step instructions to enter the code on the radio. Therefore, your Honda car stereo will be fully unlocked for use again.
important clue! Please read carefully!
Before ordering a Honda radio code unlock, be sure to follow our requirements checklist:
Make sure your Honda radio is locked. Try turning on your Honda radio and wait for the radio to ask for the unlock code. If it does not ask you for a password, your Honda radio is unlocked.
Be sure to tell us the correct serial number of your Honda radio to help us send you the correct unlock code.
Make sure your Honda radio is not stolen.
