how to disassemble a car radio on honda civic?
of reading - words
Let's start by saying that in this car the entire dashboard and the front are connected. You must first pull the seat forward, then use a screwdriver and metal tools to unscrew the various plastic covers, remove the screw located in the central part of the compartment, then pull the seat forward and remove another screw then the front one. Now go to the passenger side, remove the plastic cover by exerting pressure to the right with a metal tool, and remove the screw with a screwdriver so that you can unhook the entire lower plastic part. Repeat the same operation on the driver's side as well. Now with both hands, slightly below the gearbox, release the part where the handbrake is, then the part of the gearbox, still using the metal tool. Now switch to the car radio. Lift the top where the air is and carefully remove the top from the radio. Remove the screws that are now exposed above and below and you can now remove the car stereo. Unplug the wire and that's it.
