How to install a car radio on a Mercedes E-Class?
of reading - words
You are tired of constantly hearing the same tapes, listening only to the radio, your phone is full of your favorite music, but you have no auxiliary socket or USB port on the Mercedes E Class car radio, preventing you to get the most out of your Journey vehicle... it's your lucky day, we have written this article to accompany you, in fact, today you will learn how to install a car radio on your Mercedes E-Class. To do this, first we will see how to remove an old car radio, then how to install a car radio on a Mercedes E-Class, and then how to connect it.
HOW TO INSTALL THE MERCEDES E CLASS CAR RADIO: REMOVE THE OLD
Before the shot, how to install a car radio on a Mercedes-Benz E-Class, there is an essential step, the dismantling of the car radio that you currently have on the Mercedes-Benz E-Class. In both cases, either you have an origin station, or you have a suitable location. You absolutely must remember to remove the negative battery cable before dismantling to rule out any shorting or electrocution issues. Once this is done, here are two techniques, depending on the pillars installed on your Mercedes E-Class:
original post:
In this case you will need a little patience, in most cases just using the extraction pliers in the 4 holes at the corners of the car radio will be enough for you to remove it. However, in certain ranges over a given year, this method is not enough for you to remove the old car radio from your Mercedes E-Class. Indeed, certain elements must be removed from the center console to access the car radio itself. To do this, you must use a screwdriver to remove the plastic blocking cover. You have to remember when to go to the station to disconnect all connections.
Suitable position:
In this case the technique is easier to do, just use the extraction pliers and press on the 4 corners of your kit to remove it from the case. After this step, do not forget to disconnect it and remove the metal frame that supports it in the recess of the center console. That's it, you've finished removing the old car radio, all you have to do is install the new one!
How to install a Mercedes E-Class car radio: car radio installation and connection
Let's review the steps that interest you the most, how to install a car radio on a Mercedes E-Class. First, take the time to check the compatibility of your car radio with your Mercedes E-Class and consult the assembly instructions which can help you. give specific directions.
Here are the different steps to install a normal car radio. First, install the metal frame supplied with the new radio in place, the latter has the function of holding the car radio in place, and once positioned, do not forget to press the locking tabs on each side of the frame. After this step, you must connect the three sockets of the car radio, 2 ISO connectors for power supply and sound transmission to the speakers of the Mercedes E-Class, then the radio aerial socket. For this, on some models you may need an adapter to convert it from male to female to accommodate the newly extended plug. Finally, all you have to do is install the car stereo into the metal frame, snap it into place, and place the included plastic or metal frame over the frame. Never mind, you've just learned how to install a car radio on your Mercedes E-Class, don't forget to make sure the radio is working, the sound is working, and you pick up the radio, you can use your new car radio.
If you have any further questions or queries about the Mercedes E-Class, you can of course find solutions in our Mercedes E-Class guide.
