HOW TO INSTALL THE CAR RADIO ON NISSAN MICRA
of reading - words
Are you tired of listening to the same CDs, tired of only enjoying the radio, and your laptop is full of your favorite tunes, but you don't have a jack or USB port on your Nissan Micra car radio, this which actually prevents So that you can make the most of your car journey... you are lucky that our editorial staff has written this article to help you, in fact, you will now see how to install a car radio on your Nissan Micra. To do this, first we will see how to disassemble your old car radio, then how to install a car radio on your Nissan Micra, and then, how to connect it.
HOW TO INSTALL THE NISSAN MICRA CAR RADIO: REMOVE THE OLD
Before the attack, how to install a car radio on a Nissan Micra, there is an essential step, the dismantling of the car radio that you have on your Nissan Micra today. 2 scenes, either you have an original position or you have a correct position. It is essential to remember to remove the negative cable from the battery before dismantling to eliminate any risk of short circuit or electrocution. Once this is done, here are two ways, depending on the post installed on the Nissan Micra:
Original position:
In this case you have to be a little patient and in principle it will suffice to use the extraction pliers in the 4 holes at the corners of the car radio to remove it. But in certain segments over a given year, this technology will not be sufficient to allow you to remove the old car radios from your Nissan Micra. Indeed, you have to dismantle parts of the central console to access the car radio itself. To do this, you will need to use a screwdriver to remove the plastic cover that is causing the problem. Once you reach the post, you have to remember to undo all the connections.
Suitable position:
In this case the solution is easier to find, just use an extraction pliers and press on the 4 corners of the device to remove it from the case. Now that you have performed this step, consider undoing it and removing the metal frame supporting it inside the center console notch. That's it, you've finished removing the old car radio, all you have to do is install the new one!
HOW TO INSTALL THE NISSAN MICRA CAR RADIO: INSTALLING AND CONNECTING YOUR CAR RADIO
Let's start with the step that interests you the most, how to install a car radio on your Nissan Micra. In the meantime, please take the time to check the compatibility of your car radio with your Nissan Micra and consult the installation guide which can give you precise information.
Here are the different steps to install a classic car radio. First locate the metal frame that comes with the new radio, its function is to hold the car radio in place, once positioned, remember to press firmly on the locking tabs located on the sides of the frame. After having checked this step, you will need to reconnect the three sockets of the car radio, the two ISO connectors for power and sound transmission to the speakers of the Nissan Micra, and the radio aerial socket. For the latter, on some models you may need an adapter to change it from male to female to match your new station's plug. Finally, all you have to do is install the car stereo into the metal frame, snap it into place, and place the included plastic or metal frame over the frame. Great, you have just learned how to install a car radio on your Nissan Micra, remember to check that the radio is on, that the sound is ok, and that you pick up the radio, you can listen to the new car radio.
If you have any other questions about the Nissan Micra, feel free to read our other Nissan Micra articles.
