How to disassemble the car radio on Ford Focus?
of reading - words
You are tired of listening to the same CDs and only enjoying the radio, your smartphone is full of your favorite sounds, but your Ford Focus does not have a jack or USB port on the Ford Focus car radio, preventing you get out of your car Make the most of life while travelling... Our editors have written this tutorial to help you, in fact, you will now learn how to install a car radio on your Ford Focus. To do this, first we will see how to remove an old car radio, then how to install a car radio on a Ford Focus, and finally how to connect it.
How to install a Ford Focus car stereo: removing older models
Before the official launch of the procedure for installing a car radio on a Ford Focus, there is an essential step, removing the car radio that you currently have on your Ford Focus. 2 possible situations, either you stay in the original position or you stay in an adapted position. Before proceeding with disassembly, the negative battery cable must be removed to eliminate any short circuit or shock problems. Once this is done, here are the two procedures after the gas station installed on the Ford Focus:
Original position:
In this case you will have to be patient, generally a simple use of an extraction pliers in the 4 holes at the corners of the car radio will be enough for you to remove it. However, in certain ranges over a given year, this operation is not sufficient to allow you to remove your old car radio from your Ford Focus. Indeed, you have to dismantle parts of the central console to access the car radio itself. To do this, you must use a screwdriver to remove the plastic blocking cover. Once you visit the station to remove all connections, you will have to think about it.
Suitable position:
If this is the case, the procedure is much simpler, just use the extraction pliers and push the 4 corners of the kit in order to take it out of the case. Now that you've done this step, plan to disconnect it and remove the metal frame that supports it in the center console notch. Great, you have removed your old car radio, all you have to do is install the new one!
How to install a Ford Focus car radio: Install and connect your car radio
Let's move on to the most important step for you, how to install a car stereo on your Ford Focus. Beforehand, take the time to check the compatibility of your car radio with the Ford Focus and read the assembly instructions, which should give you precise information.
Here are the different steps to install a normal car radio. First, locate the metal frame supplied with the new radio, this has the role of holding the car radio in place, and once in place, remember to press firmly on the locking tabs on each side of the frame. After this step, you will need to reconnect the three car radio sockets, the 2 ISO connectors for power supply and sound transmission to the speakers of the Ford Focus, and finally the radio aerial socket.
For this, on some models you may need an adapter to change it from male to female to accommodate the plug in the new location. Finally, all you have to do is insert the car stereo into the metal frame, snap it into place, and place the included plastic or metal frame over the frame. You're done, you've just learned how to install a car stereo in your Ford Focus, plan to make sure the radio is on, that it sounds good, and you've picked it up and your new car stereo is ready to go.
If you want to learn more about the Ford Focus, be sure to check out our other Ford Focus articles.
