How to change the car radio of your Ford Fiesta?

How do I install a car radio on my Ford FIESTA?

Are you tired of listening to tapes and only listening to the radio, and your smartphone is full of your favorite music files, but you don't have a 3.5mm or USB port on your car stereo, so you can't thank your car for max Drive to the limit... that's why we created this content to help you, because in this article you will learn more about how to install a car stereo on your Ford Fiesta. To do this, we will first learn how to dismantle an old car radio, then how to install a car radio on a Ford Fiesta, and finally how to connect it.

How to install a car stereo on a Ford Fiesta: Removing your old car stereo

Before starting the serious work of how to install a car stereo on your Ford Fiesta, there is one necessary task, getting out the audio equipment you currently have in your car. There are two cases, either you have an original main unit or you have a universal group. Always remove the negative battery cable before beginning disassembly to avoid any risk of short circuit or electric shock. Once this is done, here are two methods, depending on the stereo system installed on your Ford Fiesta:

Original car radio:

In this case, persistence is required, and in most cases, it is enough to simply use the clips that extract the 4 holes in the corners of the car radio to remove it. But on some models in some years, this procedure is not sufficient to remove the old car radio from your Ford Fiesta. In fact, you have to remove some auto parts from the center console to access the car stereo itself. To do this, you must use a screwdriver to remove the blocking plastic cover. Be sure to disconnect all connections once you gain access to the station.

Replace the car radio:

In this case, the process is less difficult, just use the extraction pliers and press on the 4 corners of your workstation to remove it. Once you've done that, be sure to unplug it and remove the metal frame that supports it in the center console recess. That's it, you've finished dismantling the old car radio, all you have to do is install the new one!

How to install a car radio on your Ford Fiesta: install and connect a car radio

Let's continue with your basic steps to install a car stereo on your Ford Fiesta. Beforehand, take the time to check the compatibility of your car and your car radio, and read the installation manual carefully, it can give you precise instructions.

Below are the various guides you need to install an aftermarket car stereo. First, install the metal frame that came with your new car stereo, the frame's job is to hold your car stereo to the Ford Fiesta, and once it's in place, be sure to press the locking tabs on each side of the frame. After this step, you will need to connect the three sockets of the car radio, the two ISO connectors for power and sound transmission to the speakers of the Ford Fiesta, then the radio aerial socket. For the latter, on some models you may need an adapter to convert it from male to female to fit the new radio's socket. Finally, all you have to do is push the car stereo into the metal frame, snap it into place, and position the included plastic or metal frame over its surround.