How to connect a car stereo to Chrysler Voyager S2
of reading - words
Replacing the car radio on the Chrysler Eco Voyager
How do I replace the radio in my Chrysler Eco Voyager?
Replacing a Chrysler Eco Voyager radio was absolutely trivial at first. Whether it's because you want a replacement, because the car radio in your Chrysler Eco Voyager is damaged or requires maintenance, or simply because you need access to the rear.
The reasons for this operation are many and easy to implement. So here is a little tutorial to help you change your car radio .
Also read: How to change the car radio of your Chrysler?
How to remove the car radio from the Chrysler Eco Voyager?
First, to remove your Chrysler Eco Voyager car radio , you must have suitable pliers or extractors to pull on the car radio. The Chrysler Eco Voyager car radio is erased by simply placing the tool in the hole provided for this purpose. If you don't have one, you can purchase a radio extraction key via our product link below.
In another way, there is an older technique which consists in using a hanger to reproduce the keys, the Chrysler Eco Voyager car radio would thus be disassembled. If the first method failed, you will have to go through a second technique which consists of taking two thin metal or plastic blades and sliding them on the side of the Chrysler Eco Voyager car radio.
Then you will have to use the tools slightly from top to bottom and from left to right in order to be able to reach the clip of the Chrysler Eco Voyager radio unit . Then hold the blade and pull the car radio towards you at the same time. Well, you can now replace your Chrysler Eco Voyager radio.
How to connect and disconnect the Chrysler Eco Voyager radio?
After removing the Chrysler Eco Voyager car radio from its location, it must be unplugged immediately. First, identify the antenna connector of your Chrysler Eco Voyager, which is a circular connector. You can disconnect it.
Then release the hooks on both sides to disconnect the connector from the radio. Well, your Chrysler Eco Voyager radio is now completely removed !
As far as the connections are concerned, you just have to repeat these steps, so don't forget the connector located at the back of the Chrysler Eco Voyager radio when connecting the radio antenna.
How to install a car radio in your Chrysler Eco Voyager?
Here, installing the radio on your Chrysler Eco Voyager is as easy as removing it! Now, if you replaced the car radio in your Chrysler Eco Voyager, make sure the radio fits in your Chrysler Eco Voyager and is the right size to slide it into place!
Regarding the installation of the radio, you only need to plug in the antenna and the electrical connections before setting it up.
Then push the new device down until you feel the clip close. Well done, it's done!
This article on How to connect a car stereo to Chrysler Voyager S2 is now finished. We hope it has you more. Do not hesitate to let us know in the comments.
Glossary: Touch screen, Thumbs, Tactile, Dashboard, Apple carplay, Android auto, Hands-free, Alpine, Mp3, Pioneer, Speakers, Diesel, Mégane, Stereo, Tuner, Dab, Steering wheel control, Car radio cd, Bluetooth car radio, Steering wheel controls, Car radios, Navigation, GPS, Headlights, Saloon, Rds, SD card, Amplifier, Plug in, Parrot, Multimedia player
