How to disassemble a BMW E46 GPS car radio
of reading - words
How to remove the BMW E46 GPS radio?
The idea of learning how to disassemble the BMW E46 GPS car radio is basically a two-step process. The first is to secure the vehicle before removing the car radio. The second is the ability to set the appropriate method depending on the type of assembly.
Protect the vehicle before dismantling
How to safely disassemble a BMW E46 GPS car radio? You can apply two measures to this title. The first is to disconnect the battery from the vehicle. The advantage of this measure is to protect you from possible electric shocks during operation. This will also prevent short circuits in all electronic components of the vehicle.
When disconnecting the vehicle battery, never start with the positive side. The negative terminal is grounded to the body. If you remove the positive terminal first and the cable from this terminal touches your body, the battery will produce a spark. Considering all the combustible materials around, the results could be catastrophic.
Some people simply disconnect the negative terminal as a precaution. However, it would be safer to disconnect the entire battery.
The second step is to apply the car's handbrake. The usefulness of this method is very obvious. A stationary car is not necessarily stationary. A simple shock or a harmless shock can be enough to dislodge it from its position.
By activating the handbrake, you can be sure that the car will not move when you remove the BMW GPS car radio. You can also add wedges under the wheels for optimal vehicle support.
Also read: BMW E90 car radio replacement
Define the appropriate method depending on the type of assembly
How to disassemble the BMW E46 GPS car radio with flush mounting? The solution was to loosen the clips securing the BMW E46 car radio to the dashboard. This requires the use of a special tool called a DIN key. The latter can directly access the clips on the device and unlock them.
DIN keys are generally available in two versions. On the one hand there are U-shaped pliers and on the other hand there are flat keys. The type of key to use depends mainly on the interface of the original device. If the latter has two small parallel holes lined up on either side, a clevis is an option. If the device has straight slots on each side, you will need to use flat-nose pliers.
How to disassemble the BMW E46 GPS car radio with DIN key? Simply plug them into the aforementioned slots. Gently push the key into the unlock slot until you hear a slight click.
The latter means that the tool hangs from the release clip. Then pull the key while shaking the GPS unit to remove it from the dashboard.
How to remove a firmly attached BMW E46 GPS car radio? Car stereos with firmly mounted car Bluetooth use screws or bolts to connect. Some models have Allen type fixings. You will need an Allen key to undo them.
Others are attached with more traditional bolts or screws. This will allow you to use more common tools to remove them. This includes a flat blade screwdriver or Torx tool.
This article on How to disassemble a BMW E46 GPS car radio is now finished. We hope it has you more. Do not hesitate to let us know in the comments.
Glossary Bmw E90 car radio replacement: Touchscreen, Thumbs, Touchscreen, Dashboard, Apple carplay, Android auto, Hands-free, Alpine, Mp3, Pioneer, Speakers, Diesel, Mégane, Stereo, Tuner, Dab, Steering wheel control , CD car radio, Bluetooth car radio, Steering wheel controls, Car radios, Navigation, GPS, Headlights, Sedan, Rds, SD card, Amplifier, Plug in, Parrot, Multimedia player
